How to Check Car Oil

The most essential fluid in any vehicle driving around Orland Park is motor oil. It represents the lifeblood that keeps your engine’s internal moving parts functioning. Yet all too often, a lot of Tinley Park and Mokena drivers neglect this critical aspect of vehicle maintenance.

At Bettenhausen CDJR, our service center has seen all kinds of issues and receives multiple auto maintenance questions. It’s one of the reasons we’ve written pieces covering “How to keep an unused car healthy” and “What you can put in your Winter Emergency Car Kit in Tinley Park.” Keep reading below to learn how to check your car oil with ease/

Learn How to Check The Oil Level in Your Car

When it comes to how to check your oil level in a car, the type of vehicle you have can also vary. Newer models have electronic oil monitors, in contrast to standard dipsticks. You should always begin by checking your owner’s manual and see what’s recommended. In terms of how to check car oil manually, follow these steps:

1. Make sure your vehicle is parked on level ground and that the engine is turning off and cold.
2. Open the vehicle’s hood and find your dipstick.
3. Pull out your dipstick from the engine and wipe any oil from its end.
4. Reinsert the car’s dipstick all the way back into its tube, then pull it out and look at both sides to see where the level is.

All vehicle dipsticks have some marker on them to indicate both your current and proper oil level. If the top of your oil streak is between two marks, or within a cross-hatched area, you’re good. If it’s not, you’ll need to add more oil as soon as possible.

Remember to buy the oil grade that’s recommended. Remove your oil filler cap, then add oil a little bit at a time, until your dipstick showcases you’ve reached the proper level that your vehicle requires.

Why Check Your Car’s Oil Level?

As we’ve indicated oil is the lifeblood of your vehicle and so the right oil level is ideal to have the right performance in Tinley Park. Yet to some Orland Park drivers, how to check car oil can be overlooked in terms of regular services.

In truth, many auto experts nowadays recommend that oil changes be done at least twice, depending on your vehicle and how it’s driven. You should at least check your oil once a month. This can ensure there are no leaks and you have enough oil for any visits around Mokena and beyond. If however, you have a car hood that’s too hot to touch or steam comes from under the hood, scheduling an appointment is critical. You may have an overheating engine or an oil leak.

How to Reset Oil Change Light

At the same time, every vehicle has a specific process for resetting your oil change light. It should be noted that the general process is the same. You should only reset the oil change light if you’ve actually changed your car’s oil. Failing to keep up with regularly scheduled oil changes can damage your car in the long run.

How to Reset Oil Change Light: Step-by-Step:

• Turn off all car systems, yet leave the engine running.
• Find the “Reset” button and stick it on the dashboard (Usually found near the speedometer and fuel gauge).
• Hold the button down until the oil change light begins to flash (Signs of resetting may differ per vehicle model).
• Turn off your ignition, wait a few seconds, then turn your car back on.

By now, your car oil light should be reset. For those who have any questions, don’t forget to reach out to our service technicians at 708-840-8678 or online.

Keep Your Car Running in Tinley Park With Bettenhausen CDJR.

Beyond explaining how to check car oil, Bettenhausen CDJR is geared towards helping you keep your vehicle running for years to come. Always browse our Mopar service coupons and see what’s available before your next visit. We’re the go-to car service place for many Mokena drivers and beyond. See you shortly!